31
D-Link DCS-4802E User Manual
Section 3: Configuration
Settings
Network Settings
Use this section to configure the network connections for your camera. All relevant information must be entered accurately. Please
note that PPPoE must be disabled to make any changes on this page; refer to
"PPPoE" on page 32
for more details. After making
any changes, click the
Save
button to save your changes.
DHCP:
Static IP
Client:
IP address:
Subnet mask:
Default
router:
Primary DNS:
Secondary
DNS:
Select this connection if you have a DHCP server running on
your network and would like your camera to obtain an IP address
automatically.
If you choose DHCP, you do not need to fill out the IP address settings.
You may obtain a static or fixed IP address and other network
information from your network administrator for your camera. A
static IP address may simplify access to your camera in the future.
Enter the fixed IP address in this field.
This number is used to determine if the destination is in the same
subnet. The default value is 255.255.255.0.
Enter the router/gateway used to forward frames to destinations in
a different subnet. Invalid router/gateway settings may cause the
failure of transmissions to a different subnet.
Enter the primary domain name server for translating domain
names to IP addresses.
Enter the secondary domain name server for translating domain
names to IP addresses.
LAN Settings
