40
D-Link DCS-4802E User Manual
Section 3: Configuration
Automatic:
Day Mode:
Night Mode:
Schedule
Mode:
IR Light
Control:
Off:
On:
Sync With
ICR:
Schedule:
The Day/Night mode is set automatically. Generally, the camera
uses Day mode and switches to Night mode when needed. Use
the
Sensitivity
drop-down box to select when the camera should
switch to Night mode. The text to the right of the drop-down box
shows what the current lighting conditions are like, and you can
refresh this information by clicking the
Refresh
button.
Day mode enables the IR Cut Filter and turns off the IR LEDs.
Night mode disables the IR Cut Filter and turns on the IR LEDs.
Set Day/Night mode using the schedule set in the drop-down boxes.
The camera will enter Day mode at the starting time and return to
Night mode at the ending time.
Activate the
Disable IR LED
to set Day mode for the set times.
The camera can enable or disable the IR (infrared) light according
to your preferences. This setting provides additional controls
depending on your specific application.
Disables the IR light.
Enables the IR light.
The IR light will turn on when the ICR filter is disabled (night mode).
The IR light will turn on or off according to the schedule that you
specify below.
ICR & IR
Use this section to configure the IR LED and IR-cut removable filter
behavior for your camera.
ICR
IR Light
