41
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual
Section 3: Configuration
D/N Setting
Delay/
Sensitivity
IR LED
IR LED Mode
Day Mode
enables the IR Cut Filter and turns off the IR LEDs.
Night Mode
disables the IR Cut Filter and turns on the IR LEDs. Select
Auto
to set the
day/night mode automatically according to the amount of light in the
environment, or
Timing
to set it according to a schedule.
If
Auto
is selected, configure how long the camera should wait after a change
in lighting conditions to adjust the day/night mode, and how sensitive it
should be to changes in the environment.
Toggle this to enable or disable the IR LED.
Select
Manual
to set the IR LED level or
Auto
to have the camera adjust it
automatically.
ICR & IR
Use this section to configure the IR LED and IR-cut removable filter behavior
for your camera.
