D-Link DAS-3636 Скачать руководство пользователя страница 433

Страница: 433 / 480

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual

config vdsl profile TrellisCoding

Purpose

Used to config vdsl profile TrellisCoding

Syntax

config vdsl profile [<profile_id 1-60>|name <profile_name 32>] TrellisCoding [disable|enable]

Description

This command is used to enable/disable VDSL trellis coding.

Parameters

<profile_id 1-60>–

The profile ID of the profile to be configed

name <profile_name 32>–

The name of the profile to be configed

TrellisCoding–

To config VDSL trellis coding



enable–

enable VDSL trellis coding



disable

–disable VDSL trellis coding

Restrictions

Only Administrator-level users can issue this command.

Example usage:

To config vdsl trellis coding

DAS-3626:admin#config vdsl profile name default TrellisCoding enable

Command: config vdsl profile name default TrellisCoding enable

Success.

DAS-3626:admin#

config vdsl profile RateAdaptive

Purpose

Used to config vdsl profile rate adaptive method

Syntax

config vdsl profile [<profile_id 1-60>|name <profile_name 32>] RateAdaptive [fix|rate-
adaptive]

Description

This command is used to config VDSL rate adaptive.

Parameters

<profile_id 1-60>–

The profile ID of the profile to be configed

name <profile_name 32>–

The name of the profile to be configed

RateAdaptive–

To config VDSL profile rate adaptive method



fix–

The vdsl line will only train at the maximum data rate specified. If

synchronization fails,

the channel will keep attempting to train at the fixed rate indefinitely.



rate-adaptive–

Synchronization will occur within the margin between

maximum and minimum data rates specified. Depend online condition.

Restrictions

Only Administrator-level users can issue this command.

Example usage:

To config vdsl profile rate adaptive method

DAS-3626:admin#config vdsl profile name default RateAdaptive fix

Command: config vdsl profile name default RateAdaptive fix

Success.

DAS-3626:admin#

428

Содержание DAS-3636

































































































































































































































































































































































































































































































Результаты поиска

Содержание DAS-3636

Отзывы:

Бренды по названию

Популярные бренды

D-Link DAS-3636, Справочное руководство CLI

Результаты поиска

Содержание DAS-3636

Отзывы:

Бренды по названию

Популярные бренды