D-Link DAS-3636 Скачать руководство пользователя

Страница: 33 / 480

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual

ODIFY

ANNER

AND

ROMPT

OMMANDS

Administrator level users can modify the login banner (greeting message) and command prompt by using the commands described
below.

Command

Parameters

config command_ prompt

[<string 16> | username | default]

config greeting_message

{default}

show greeting_message

The modify Banner and Prompt commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.

config command prompt

Purpose

Used to configure the command prompt.

Syntax

config command_prompt [<string 16> | username | default]

Description

This command is for users to change the command prompt.

Parameters

string 16

–The command prompt can be changed by entering a new name of no more that 16

characters.

username

– The command prompt will be changed to the login username.

default

– The command prompt will reset to factory default command prompt.

Restrictions

Only Administrator and Operator-level users can issue this command. Other restrictions
include:

•

If the “

reset

” command is executed, the modified command prompt will remain

modified. However, the “

reset config/reset system

” command will reset the

command prompt to the original factory banner.

Example usage:

To modify the command prompt to “AtYourService”:

Содержание DAS-3636

































































































































































































































































































































































































































































































Результаты поиска

Содержание DAS-3636

Отзывы:

Похожие инструкции для DAS-3636

Бренды по названию

Популярные бренды

D-Link DAS-3636, Справочное руководство CLI

Результаты поиска

Содержание DAS-3636

Отзывы:

Похожие инструкции для DAS-3636

Бренды по названию

Популярные бренды