D-Link DAS-3636, Справочное руководство CLI

Страница: 271 / 480

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
show cfm fault
Purpose This command is used to show fault MEPs.
Syntax show cfm fault {md <string 22> {ma <string 22>}}
Description This command is used to display all the fault conditions detected by the MEPs contained in
the specified MA or MD. This display provides the overview of fault status by MEPs.
Parameters md – Specifies the maintenance domain name.
ma – Specifies the maintenance domain name.
Restrictions None.
Example usage:
To display CFM fault:
DAS-3600-12:4#show cfm mep fault
Command: show cfm mep fault
MD Name MA Name MEPID Status
----------- ----------- ----- ---------------------------
op_domain op1 1 Cross-connect CCM Received
DAS-3600-12:4#
show cfm port
Purpose This command is used to show MEPs and MIPs created on a port.
Syntax show cfm port <port> {level <int 0-7> | direction [inward | outward] | vlanid <vlanid 1-
4094>}
Description This command is used to show MEPs and MIPs created on a port.
Parameters port – Specifies the port number.
level – Specifies the MD Level. If not specified, all levels are shown.
direction – Specifies the MEP direction.
inward – Inward facing MEP.
outward – Outward facing MEP.
If not specified, both directions and MIPs are shown.
Vlanid – VLAN identifier. If not specified, all VLANs are shown.
Restrictions None.
Example usage:
To display CFM ports:
DAS-3600-12:4#show cfm port 1
Command: show cfm port 1
MAC Address: 10:10:90:08:8g:12
MD Name MA Name MEPID Level Direction VID
----------- ----------- ----- ----- --------- ----
op_domain op1 1 2 inward 2
cust_domain cust1 8 4 inward 2
serv_domain serv2 MIP 3 2
DAS-3600-12:4#
266