37
D-Link DAP-1665 User Manual
Section 3 - Configuration
Access Point Mode
Wireless Mode:
Status:
Wi-Fi Name
(SSID):
Password:
Select
Access Point
from the drop-down menu.
Enables the wireless function for the
2.4 GHz
band. If you do
not want to use wireless on this band, disable the slider. You
may also set up a specific time range (schedule).
Specify a network name (SSID) to identify the 2.4 GHz network.
This is the network name that wireless clients will search for
when connecting to your wireless network.
Enter a password for connecting to your 2.4 GHz network.
2.4 GHz Band
Security
Mode:
802.11 Mode:
Wi-Fi Channel:
Transmission
Power:
Select the type of wireless security you wish to use for the
extended network. Choose from
WPA/WPA2-Personal
/
WPA/
WPA2-Enterprise/None
.
Select one of the following:
802.11n Only
- Select if you are only using 802.11n wireless
clients.
Mixed 802.11n and 802.11g -
Select if you are using a mix of
802.11n and 802.11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b
- Select if you are using
a mix of 802.11n, 802.11g, and 802.11b wireless clients.
Choose from channels 1-11 for an existing wireless network or
to reduce interference in congested areas.
The
Auto
setting can be selected to allow the DAP-1665 to
automatically choose the channel with the least amount of
interference.
Depending on your wireless reception and coverage area, you
can choose between
Low, Medium,
or
High
power.
Advanced Settings:
This section lets you configure your DAP-1665 as a wireless access point for your existing network.
