DAP-1150
Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Access Point Mode)
MAC Filter
On the
Wi-Fi / MAC Filter
page, you can define a set of MAC addresses of devices which will be
allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to
access the WLAN.
Figure 43. The MAC filter for the wireless network.
By default, MAC filtering is not active (the
Disabled
choice of the
MAC filter restrict mode
radio button is selected).
To open your wireless network for the devices which MAC addresses are specified on the
MAC
addresses
tab and to close the wireless network for all other devices, select the
Allow
choice of
the
MAC filter restrict mode
radio button and click the
Change
button.
To close your wireless network for the devices which MAC addresses are specified on the
MAC
addresses
tab, select the
Deny
choice of the
MAC filter restrict mode
radio button and click
the
Change
button.
To add a MAC address to which the selected filtering mode will be applied, proceed to the
MAC
addresses
tab.
Page
48
of 175
