DAP-1150
Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Router Mode)
Parameter
Description
Source
The source host/subnet IP address.
If the
IP address range
checkbox
is selected, specify the starting
IP address of the range in the
Source (first)
field and the ending IP
address in the
Source (last)
field.
If the
IP address range
checkbox
is not selected, specify the IP
address of the host or subnet in the
Source
field. To specify an IP
address add
/32
.
To choose a device connected to the access point's LAN at the
moment, select the relevant IP address from the drop-down list
located to the right of the field (the field will be filled in
automatically).
Destination
The destination host/subnet IP address.
If the
IP address range
checkbox is selected, specify the starting
IP address of the range in the
Destination (first)
field and the
ending IP address in the
Destination (last)
field.
If the
IP address range
checkbox is not selected, specify the
starting IP address of the host or subnet in the
Destination
field. To
specify an IP address add
/32
.
To choose a device connected to the access point's LAN at the
moment, select the relevant IP address from the drop-down list
located to the right of the field (the field will be filled in
automatically).
Ports
Source
A port of the source IP address. You can specify one port, several
ports separated by a comma, or a range of ports separated by a colon.
Destination
A port of the destination IP address. You can specify one port,
several ports separated by a comma, or a range of ports separated by
a colon.
Click the
Change
button.
To edit a rule for IP filtering, click the link to the relevant rule. On the opened page, change the
needed parameters and click the
Change
button.
To remove a rule for IP filtering, click the link to the relevant rule. On the opened page, click the
Delete
button.
Page
159
of 175
