22
C.
Search for the files
TIACXLN.INF
and
TIACXLN.SYS
.
Remove these files from the
INF
and
SYSTEM32
(DRIVERS) folders in the Windows directory. Note:
Windows XP and Windows 2000 will rename
.inf
files that
have not received WHQL certification into
oem.inf
files (e.g.,
oem1.inf.)
6. The computer with the DWL-520+ installed is unable to connect to
the wireless network and/or the Internet.
•
Check that the LED indicators for the broadband modem are
indicating normal activity. If not, there may be a problem with the
broadband connection.
•
Check that the LED indicators on the wireless router are functioning
properly. If not, check that the AC power and Ethernet cables are
firmly connected.
•
Check that the IP Address, subnet mask, gateway, and DNS settings
are correctly entered for the network
•
In
Infrastructure
mode, make sure the same
Service Set Identifier
(SSID)
is specified on the settings for the wireless clients and access
points. The
SSID
factory default setting for the D-Link
AirPlus
products is
default.
(Double-click on the WLAN icon in the taskbar.
The
Link Info
screen will display the SSID setting.)
•
In
Ad-Hoc
mode, both wireless clients will need to have the same
SSID
. Please note that it might be necessary to set up one client to
establish a
BSS (Basic Service Set)
and wait briefly before setting
up other clients. This prevents several clients from trying to establish
a
BSS
at the same time, which can result in multiple singular
BSSs
being established, rather than a single
BSS
with multiple clients
associated to it.
•
Check that the
Network Connection
for the wireless client is
configured properly. Select
AP (Infrastructure)
when connecting to
an access point and select
Ad-Hoc mode
when connecting without
an access point. Double-click on the
WLAN
icon
in the taskbar >
click on
Configuration
to change the settings for the wireless
adapter.
•
If
Security
is enabled, make sure that the correct encryption keys are
entered on both the DWL-520+ and the access point. Double-click
on the
WLAN
icon in the taskbar > click
Encryption
. Check to see
