39
D-Link DIR-890L User Manual
Section 4 - Configuration - Router Mode
PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses
a PPTP connection. Your ISP will provide you with a username and password.
My Internet Connection is:
PPTP
⌵
DIR-890L HW:A1
FW:1.10
Settings >> Internet
Settings
Home
Features
Management
PPTP Server IP Address:
IP or Domain name
Username:
Password:
Reconnect Mode:
On Demand
⌵
Maximum Idle Time:
5
minutes
Advanced Settings ...
IPv6
Save
Internet
Use this section to configure your Internet Connection type. There are several connection types to choose
from Static IP, DHCP, PPPoE, PPTP, L2TP and DS-Lite. If you are unsure of your connection method, please
contact your Internet service provider. Note: If using the PPPoE option, you will need to remove or disable
any PPPoE client software on your computers.
Device Mode:
Router Mode
⌵
COPYRIGHT © 2016 D-Link
PPTP Server IP
Address:
Enter the PPTP server IP address provided by your ISP.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Reconnect Mode:
Select either
Always-on
,
On-Demand
, or
Manual
.
Maximum Idle
Time:
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Advanced Settings
Address Mode:
Select
Static IP
if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Device Mode:
Router Mode
My Internet
Connection Is:
PPTP