86
D-Link DIR-890L User Manual
Section 4 - Configuration - Router Mode
Quick VPN
DIR-890L HW:A1
FW:1.10
Features >> Quick VPN
Quick VPN
Quickly and easily create a profile for secure remote access to a Local Area Network (LAN). This profile can
be used to configure other devices to connect to your LAN via a secure VPN tunnel.
Settings
Features
Home
Management
Save
L2TP over IPsec:
Enabled
Username:
VPN_Username
Password:
A_Str0nG_P@ssW0rd!%!
PSK:
A_Str0nG_P@ssK3y!%!
Save Configuration To Local Hard Drive:
Save
General
Username:
MSCHAPv2
⌵
MPPE:
RC4-128
⌵
Advanced
Advanced Settings ...
COPYRIGHT © 2016 D-Link
This page will help you configure the Quick VPN feature of your router. For more information
refer to
. Before proceeding, ensure that your Internet connection
is working properly. We recommend configuring Dynamic DNS before proceeding with
Quick VPN setup. If your router is assigned an IP address from your ISP using DHCP, it may
frequently change, requiring clients credentials to be set up again and a simple DDNS address
will be easier than an IP address.
Configure the following options:
L2TP over IPSec:
Enable or disable the Quick VPN server.
If you enable
Quick VPN
, the following options are available:
Username: .
Enter a username between 1 and 15 characters
Password:
Enter a password between 1 and 15 characters.
PSK:
Enter a passkey between 6 and 64 characters.
Save
Configuration To
Local Hard Drive:
For Apple iOS devices and OS X
: From a computer browser click
this button to export a profile to simplify setup. E-mail this file as an
attachment to your Apple mobile device or open the file in OS X.
Authentication
Protocol:
Choose the authentication protocol type:
MSCHAPv2
,
PAP
, or
CHAP
.
MSCHAPv2
is the default.
MPPE:
Select the encryption cipher strength:
none
,
RC4-40
, or
RC4-128
.
RC4-128
is the default.
Click
Save
when you are done.