D-Link 0790069323058 Скачать руководство пользователя

Страница: 8 / 101

D-Link DAP-1360 User Manual

Section 1 - Product Overview

• Faster Wireless Networking -

The DAP-1360 provides up to 300Mbps* wireless connection with other 802.11n wireless

clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming,

and real-time audio.

• Compatible with IEEE802.11g Devices -

The DAP-1360 is still fully compatible with the 802.11g standards, so it can

connect with existing 802.11g PCI, USB, and Cardbus adapters.

• Advanced Firewall Features -

The Web-based user interface displays advanced network management features including

Content Filtering, which allows easily applied content filtering based on MAC Address.

• WPS PBC-

(Wi-Fi Protected Setup Push Button Configuration) Push Button Configuration is a button that can be pressed

to add the device to an existing network or to create a new network. A virtual button can be used on the utility while

a physical button is placed on the side of the device.

This easy setup method allows you to form a secured wireless link between the DAP-1360 and another WPS enabled

device. A PC is no longer needed to log into the Web-based interface.

• WPS PIN -

(Wi-Fi Protected Setup Personal Identification Number ) A PIN is a unique number that can be used to add

the access point to an existing network or to create a new network. The default PIN may be printed on the bottom of

the access point. For extra security, a new PIN can be generated. You can restore the default PIN at any time. Only the

Administrator (“admin” account) can change or reset the PIN.

• User-friendly Setup Wizard -

Through its easy-to-use Web-based user interface, the DAP-1360 lets you control what

information is accessible to those on the wireless network, whether from the Internet or from your company’s server.

Configure your access point to your specific settings within minutes.

Features

Содержание 0790069323058






































































































Результаты поиска

Содержание 0790069323058

Отзывы:

Похожие инструкции для 0790069323058

Бренды по названию

Популярные бренды

D-Link 0790069323058, Руководство пользователя

Результаты поиска

Содержание 0790069323058

Отзывы:

Похожие инструкции для 0790069323058

Бренды по названию

Популярные бренды