D-Link 0790069323058 Скачать руководство пользователя

Страница: 35 / 101

D-Link DAP-1360 User Manual

Section 3 - Configuration

Enable Wireless:

Wireless Mode:

Wireless

Network Name:

802.11 Mode:

Wireless

Channel:

Enable Auto

Channel Scan:

Check the box to enable the wireless function. If you

do not want to use wireless, uncheck the box to disable

all the wireless functions. You may also set up a specific

time range (schedule). Select a schedule from the drop-

down menu or click

Add New

to create a new schedule.

Select

Access Point

from the drop-down menu.

When you are browsing for available wireless networks,

this is the name that will appear in the list (unless

Visibility Status is set to Invisible, see below). This name

is also referred to as the SSID. For security purposes, it

is highly recommended to change from the default

network name.

Select one of the following:

802.11b Only

- Select if you are only using 802.11b

wireless clients.

802.11g Only

- Select if you are only using 802.11g

wireless clients.

802.11n Only

- Select if you are only using 802.11n

wireless clients.

Mixed 802.11g and 802.11b -

Select if you are using

a mix of 802.11g and 11b wireless clients.

Mixed 802.11n and 802.11g

- Select if you are using

a mix of 802.11n and 11g wireless clients.

Mixed 802.11n, 802.11g and 802.11b

- Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.

Indicates the channel setting for the DAP-1360. The Channel can be changed to fit the channel setting for an existing wireless network

or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.

The

Auto Channel Scan

setting can be selected to allow the DAP-1360 to choose the channel with the least amount of interference.

Access Point Mode

Содержание 0790069323058






































































































Результаты поиска

Содержание 0790069323058

Отзывы:

Похожие инструкции для 0790069323058

Бренды по названию

Популярные бренды

D-Link 0790069323058, Руководство пользователя

Результаты поиска

Содержание 0790069323058

Отзывы:

Похожие инструкции для 0790069323058

Бренды по названию

Популярные бренды