41
D-Link DAP-1360 User Manual
Section 3 - Configuration
Enable Wireless:
Wireless Mode:
Site Survey:
Wireless Network
Name:
802.11 Mode:
Wireless Channel:
Enable Auto Scan:
Channel Width:
Visibility Status:
Wireless Security
Mode:
Select this to turn the Wi-Fi module on and off.
Use the drop-down box to select if you want to
use a schedule. Click
Add New
to add or change
a schedule.
Select
WISP Client
or
WISP Repeater
from the
drop-down menu.
Click this button to choose the root AP from an
available connection list. If the root AP has wireless
encryption, you have to use the same wireless
security mode to connect the root AP.
You can input the wireless network name of the
root AP or click the
Site Survey
button to find the
root AP.
Select the appropriate 802.11 mode based
on the wireless clients in your network. The
drop-down menu options are
802.11g Only
,
Mixed
802.11b/g
,
802.11b Only
,
802.11n Only
, or
Mixed
802.11b/g/n
.
The channel used will be displayed. The channel
will follow the root AP.
The
Auto Channel Scan
setting can be selected to allow the DAP-1360 to choose the channel with the least amount of interference.
Select the appropriate channel width between
20MHz
or
Auto 20/40MHz
from the drop-down menu.
Check the box if you do not want the SSID to be broadcast by the DAP-1360. This prevents the SSID from being seen by site survey
utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1360 in order to connect to it.
Select a wireless security setting. Options are None, WEP, WPA, or WPA2. Refer to the
Wireless Security
section of this manual for
a detailed explanation of the wireless security options.
WISP Client Router/WISP Repeater Modes
