background image

2

SAFETY PRECAUTIONS

About burning-in of the D-ILA device

Do not allow the same still picture to be projected for a long
time or an abnormally bright video picture to be projected.
Do not project video images with high-intensity or high contrast
on a screen. The video image could be burnt into the D-ILA
device.
Use special care when projecting video games or computer pro-
gram images. There is no problem with ordinary video-cassette
playback images.

About the installation place

Do not install the projector in a place that cannot support its
weight securely.
If the installation place is not sturdy enough, the projector could
fall or overturn, possibly causing personal injury.

IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions. This unit
has been engineered and manufactured to assure your per-
sonal safety. But 

IMPROPER USE CAN RESULT IN POTEN-

TIAL ELECTRICAL SHOCK OR FIRE HAZARD

. In order not

to defeat the safeguards incorporated into this product, ob-
serve the following basic rules for its installation,use and serv-
ice. Please read these “Important Safeguards”carefully before
use.

• All the safety and operating instructions should be read be-

fore the product is operated.

• The safety and operating instructions should be retained for

future reference.

• All warnings on the product and in the operating instructions

should be adhered to.

• All operating instructions should be followed.

• Place the projector near a wall outlet where the plug can be

easily unplugged.

• Unplug this product from the wall outlet before cleaning. Do

not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.

• Do not use attachments not recommended by the product

manufacturer as they may be hazardous.

• Do not use this product near water. Do not use immediately

after moving from a low temperature to high temperature, as
this causes condensation, which may result in fire, electric
shock, or other hazards.

• Do not place this product on an unstable cart, stand, or ta-

ble. The product may fall, causing serious injury to a child or
adult, and serious damage to the product. The product should
be mounted according to the manufacturer’s instructions, and
should use a mount recommended by the
manufacturer.

• When the product is used on a cart, care

should be taken to avoid quick stops, ex-
cessive force, and uneven surfaces which
may cause the product and cart to over-
turn, damaging equipment or causing pos-
sible injury to the operator.

PORTABLE CART WARNING

(symbol provided by RETAC)

S3126A

IMPORTANT INFORMATION

WARNING :

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EX-
POSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION :

To reduce the risk of electric shock, do not remove cover.
Refer servicing to qualified service personnel.

This projector is equipped with a 3-blade grounding type
plug to satisfy FCC rule. If you are unable to insert the plug
into the outlet, contact your electrician.

NOTICE (For USA)

Language for Manuals of Products using HID Lamps
(that contains mercury)

This product has a High Intensity Discharge (HID) lamp
that contains a small amount of mercury. It also contains
lead in some components.
Disposal of these materials may be regulated in your
community due to environmental considerations. For
disposal or recycling information please contact your
local authorities, or the Electronics Industries Alliance:
http://www.eiae.org.

WARNING :

THIS APPARATUS MUST BE EARTHED.

MACHINE NOISE INFORMATION(Germany only)

Changes Machine Noise Information Ordinance 3.
GSGV, January 18, 1991: The sound pressure level at the
operator position is equal or less than 70 dB(A) according
to ISO 7779.

FCC INFORMATION (U.S.A. only)

CAUTION:

Changes or modification not approved by JVC could void
the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with
the limits for a Class B digital devices, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful in-
terference to radio communications. However, there is no
guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encourage to
try to correct the interference by one or more of the follow-
ing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and re-

ceiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Содержание FDP-DILA3


























































Отзывы: