D-FLY DRAGONFLY, Руководство пользователя

Страница: 24 / 72

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS MAY RESULT IN SERIOUS INJURY
22
1. Once your battery is fully
charged insert into the tiller.
Carefully align the connector
slots at the base of the
battery into the cradle. 2. Push down firmly. There will
be an audible connection click,
the front light will flash once
and there is an audible sound.
This indicates the vehicle is
off but NOT alarmed.
3. Press the button on the
front of your battery to view
its charge status.
4.5 BATTERY AND CHARGER
Fully charge your Dragonfly before driving.
4.5.1 FIRST TIME CHARGING
1. Remove the charger from
the accessories case. Open
the small battery end cap
and insert the charger barrel
socket cable. 2. Connect to a power outlet
and switch on the power. A red
light indicator will signal the
battery is being charged; this
light will turn to green as the
battery progressively charges. 3. Close the cap once charging
is complete.
4.5.2 INSERTING YOUR BATTERY
4.5.3 ON-VEHICLE CHARGING
1. Place the tiller in the folded
position and open the lock
cover. 2. Using your battery or Fob
key in the side lock turn
clockwise 90 degrees to
release the battery.
3. Using two hands lift and
slide to remove the battery
from its cradle. Place on a
hard, flat, dry surface away
from direct sunlight.
4. Open the cap, insert barrel
socket cable and connect to a
power outlet. 5. Switch on. A red-light
indicator will signal the battery
is being charged; this light will
turn to green as the battery
progressively charges.
6. Close the cap once charging
is complete.
WHEN CONNECTED TO A POWER OUTLET
should
there be an abnormal state, voltage, current, temperature or short circuit, the
indicator will flash red. If this occurs, disconnect the battery from the power source.
WARNING
1. Open the cap and insert
barrel socket cable. 2. Connect to a power outlet
and switch on power. 3. Close the cap once charging
is complete.
4.5.4 REMOVING YOUR BATTERY TO CHARGE