D.E. Systems Border Patrol TC1, Руководство пользователя

Страница: 32 / 80

32
FITTING THE COLLAR
CAUTION - Do not fit the collar on your dog with the collar unit ON.
Proper collar tightness and position are very important to ensure
safe and consistent collar use.
All electronic collars need to be very snug around the dog’s neck to work
properly. They must be just tight enough to allow the “contacts” or
electrodes to make good contact on your dog’s skin. If the collar is too
loose, the stimulation may not work properly because good/consistent
skin contact is not being achieved. This can directly affect the
performance of the collar unit and whether or not the dog will receive the
stimulation. Always check for good contact to the skin if it appears that
your dog is not responding to the stimulation. A loose collar can also
result in skin irritations from moving or rubbing too much against the
dog’s neck while they are running or training. A proper fit will help
prevent this from occurring.
1. Place the collar unit high and tight on your dog’s neck with the collar
receiver box centered below the neck.
2. The collar should be tight enough to fit two fingers between the collar
belt and your dog’s neck, but not so tight that it restricts your dog’s
breathing.
NOTE - The GPS Antenna on the collar unit must be pointing upwards
with a clear, unobstructed view of the sky to ensure proper reception of
the GPS signal.
CAUTION - Cutting the collar belt is not recommended. The collar
belt may start to fray/unravel if cut.