D.A.S. AERO-182, Руководство пользователя

Страница: 13 / 45

Aero-38
Manual del usuario/
User´s manual
53
AERO-218Sub -->AERO-218A
To make a passive system into an active
one, firstly the back plate must be removed by
unscrewing the 12 M4x20 DIN965.
After cutting the speakers' wires on the
circuit board, terminals must be attached to the
speakers' wires as follows: to assure current polarity
attach large 6.3mm female
terminal to the
black wire, and a smaller 4.8mm female
terminal to the red wire. Connecting the terminals to
the correct male terminals on the amplifier circuit
board amplifie, the polarity will be correct.
faston
faston ,
faston
It is highly advisable to shield the terminals
with tape or thermoretractable material:
Then the speaker wires must be cut from the
circuit board.
NOTE: As AERO-218A and AERO 182A
amplifiers' polarity is inverted referenced to that of
conventional external amplifiers, the polarity of the
speakers' wires must be changed when switching
from a passive to an active Aero Series sub.
-