Cyrus Streamline series
User Instructions
11
Setup - n-remote
This option will pair or unpair an n-remote.
Pairing an n-remote
Refer to the Getting Started section of the n-remote instructions for the
pairing procedure.
Unpairing an n-remote
If necessary, you can unpair all n-remotes from a Streamline.
NOTE: If you unpair all n-remotes, there will be no remote control
associated with the Streamline.
Press the
•
key on the front panel repeatedly to return to the Main
Menu.
Select the Setup option from the Main Menu.
•
The Setup Menu is displayed.
Select the n-remote option from the Setup Menu.
•
Highlight and select the Unpair n-remotes option.
•
‘Unpaired all devices’ will be displayed to confirm that any paired
n-remotes have been unpaired..
Source
Setup
Network
Aux
Radio
Choose UPnP server
Navigate to music
Input 1
Input 2
Input 3
Input 4
Input 5
USB
Navigate to a station
Network Settings
Input Names
DHCP Settings
Status
DHCP
On
Off
Select an Input
Select a Name from the Library
Enter Manual IP
Main
Menu
Display network status
Balance
Set the Balance
Factory Reset
No
Yes
Settings clear when next set to Standby
n-remote
Start Pairing
Unpair n-remotes
All remotes are unpaired
Detects n-remotes searching for a pair
About
Display Software Version
Firmware update option
Used as an amplifier
Used as a source
Used as a source
CD
Tuner
AV
Setup - About
Choose this option to display information about the firmware installed in
the Streamline. You may be asked for this information if you contact Cyrus
for service or support of your system at any time.
Menu Map
A full menu map for the Streamline is shown below, including both source
selection and setup options.
