Cyrus llli
User Instructions
2
G B
G B
Welcome to the world of Cyrus!
Congratulations on your choice of Cyrus Hi-fi products. Our state-of-the-art
design technology and outstanding quality of manufacture has won
countless awards around the world. We are confident that you will derive
great pleasure from owning a product from one of the most recognised
and respected manufacturers of hi-fi equipment.
Please read these instructions carefully before commencing installation.
They provide full guidance to help you install your Cyrus llli safely and
correctly.
Preparations for Installation
Before installing the Cyrus IIIi check that the following items are included
in the accessory box.
•
Warranty Card (with instruction manual)
•
Power Cable
•
Remote Handset
•
4 Loudspeaker Plugs
After removing these items, please retain the packaging.
Install the Cyrus IIIi in a well ventilated location away from sources of high
temperature, dust or humidity. Never stand the Cyrus IIIi under another
unit or on any surface likely to hamper its cooling or ventilation.
INSTALLATION
(Refer to Fig 1)
Key to the rear panel drawing:
1.
Right Speaker Output
2.
MC-BUS System Connection
3.
Pre-Amplifier Output
4.
Tape Recorder Output
5.
Tape Input
6.
SP-Input
7.
Phono Input
8.
Aux Input
9.
Video Input
10.
Tuner Input
11.
CD Input
12.
Left Speaker Output
13.
PSX-R Connection
14.
Turntable Ground
15.
Power Inlet
16.
Mains Fuse Holder
17.
Power Switch
Connecting to the AC Mains Supply
Connect the socket on the supplied AC Power cable to the Power inlet
on
the rear panel of the Cyrus llli. Now connect the cable to a suitable AC
power point.
The mains power switch
on the rear panel of the Cyrus IIIi should be
left on for normal operation, except when left unattended for a long period
when it should be switched off or disconnected from the AC supply.
Connecting Signal Inputs
Connect the output cable from the turntable to the phono input - PH
.
Follow the colour coding of the plugs. If the turntable has a ground wire
fitted, connect this to the ground connection
of the Cyrus IIIi.
The phono input of the Cyrus IIIi is suitable for use with either moving
magnet or high output moving coil cartridges. If required, the phono input
can be converted to an extra line input by your dealer.
Connect a phono cable between each component and the sockets as
marked on the rear panel. Ensure left and right channels are correctly
connected. The Cyrus IIIi has inputs for CD Player -CD
, a tuner - TU
, a Home Theatre decoder - VI
and two auxiliary inputs - AU
and
SP
which can be used to connect a wide variety of products. Check
the specification of these products before connecting to your Cyrus IIIi.
You will need two phono cables. Connect one cable from the Output or
Playback sockets of the tape deck to the Tape Input - TP IN
of the
Cyrus IIIi and a second cable from the Input or Record sockets of the
tape deck to the Tape Record Output - TP OUT
sockets of the Cyrus
IIIi.
Connecting Loudspeakers
Fit the supplied plugs to the loudspeaker cables making sure to line up +
and - at each end. Most cables have polarity indicators and may also be
marked for directionality. The + and - terminals of the Cyrus IIIi must be
connected to the corresp and - terminals of the loudspeakers.
Having ensured that your connections are secure, connect the left and
right loudspeakers to the rear panel sockets
and
of the Cyrus IIIi.
MC-BUS System
(Refer to fig’s 1 & 7)
Connecting the MC-BUS sockets
of the Cyrus IIIi in an MC-BUS
system provides unified system control. An MC-BUS loop is established
by connecting single phono cables from the MC-BUS output of one unit to
the MC-BUS input of another in a daisy-chain. Complete the loop by
returning the MC-BUS output of the final component to the MC-BUS input
of the first.
With MC-BUS established you can control the power function of the entire
system from the Cyrus IIIi, from the front panel or remote control.
Selecting 'CD' from the front panel will switch on the Cyrus IIIi, the Cyrus
Power and a Cyrus CD player. When the Cyrus IIIi is set to Standby, the
entire system will also switch off.
When a Cyrus AV-master is in the MC-BUS loop, setting of the volume
calibration level will take place automatically when Cyrus IIIi’s. VI input is
selected. Refer to the Cyrus AV-master handbook for further details.
External Regulated Power Supply - PSX-R
The PSX-R is a unique DC power supply which will upgrade the sonic
performance of your Cyrus IIIi and enhance its current drive. When a
Cyrus IIIi / PSX-R combination is installed, analogue and signal related
sections of the Cyrus IIIi are powered from this clean, stable power
source while other requirements are supplied internally. This ensures
complete isolation of control circuits and sensitive analogue sections
reducing AC mains-borne noise and power supply ripple.
To connect the PSX-R to the Cyrus IIIi plug the connector on the
umbilical cord of the PSX-R into the Multi-Pole socket on the rear of the
Cyrus IIIi (
Fig.1) You will need a mains supply for both units.
NOTE- When you add a Cyrus PSX-R to your system it is essential for
your Cyrus IIIi to be modified by your dealer or an authorised Cyrus
service organisation. Connecting the Cyrus PSX-R to a Cyrus IIIi, which
is not correctly modified will result in a fault condition display on the Cyrus
IIIi. (see page 4 for further details.)
OPERATION
(Refer to fig 2)
Key to the front panel drawing:
1.
Mute Switch
2.
Standby Switch
3.
Standby Light
4.
Balance
5.
Remote Eye
6.
Level Control
7.
Tape Monitor Switch
8.
SP Input
9.
Auxiliary Input
10.
Video (AV) Input
11.
Tuner Input
12.
CD Input
13.
Phono
Power
When power is applied, the STANDBY key
is used for power control.
The Standby light
shows green when the Cyrus IIIi is operating and
glows red when in standby mode. The Cyrus IIIi will switch from standby
to on, when any input key
-
is selected.
When the Cyrus llli is switched on from the rear panel mains switch, it will
perform a self-test and sit in Standby mode. When first switched on from
standby the CD input is automatically selected and the volume is set to
minimum.
After the Cyrus llli as been operational and the unit is switched back into
Standby mode, all settings for input selection and Volume/Balance are
retained.
Содержание IIIi
Страница 1: ...User Instructions Cyrus IIIi...
