F2MC-16FX Family, Emulator System MB2198-01 Installation Guide, Doc. No. 002-05547 Rev. *A
17
5. Troubleshooting
Trouble during Installation
5.1
Emulator Software does not work in debugging mode
Note, that the Emulator Software will not work if the Emulator is not powered on, not connected to a Target
Board, not connected properly to a PC or if no Evaluation MCU is in the socket.
The Target Board must provide power logic signals to all MCU pins.
5.2
Wrong COM-Port in Softune Workbench
The basic setting after installation for the RS232-PC-COM-Port is COM1. If you want to use your COM2-Port
then click with the right mouse button on the entry MB2198-01_COM1.sup in the project window. Then a small
popup window is displayed. Choose
change
.
Now a Setup Wizard starts. Let all entries in their default states, until the following window occurs:
In this window, you can choose the COM2 port.
Click
Next>
and finally
Finish
.
