Setting up the Emulation Software
F2MC-16FX Family, Emulator System MB2198-01 Installation Guide, Doc. No. 002-05547 Rev. *A
16
After a short moment, the Softune Workbench will go in its debugger state. The Window will look like this:
Look on the LC display of the Emulator. The following message should be displayed:
“BREAK Vol:OK [Enter]:Menu”
Now choose the menu
Debug/Run/Go
or press F5 or click the
button.
Look at the Starter Kit Board. The LEDs of Port0 have to flash
alternately.
The LCD on the emulator should display:
“EXEC Vol:OK [Enter]:Menu”
To end debugging, choose
Debug/End debug
in the Softune Menu Bar. The emulator system will then halt.
