SHOW TITLE MM/DD/YY
37
SLIDE OWNER
Flash Programming via CN3 (Serial)
▪
FLASH MCU Programming via CN3 (Serial)*
•
Jumper setting
✓
Open jumpers J3 (JTAG) and J10 (NMIX)
✓
Close jumpers J7 (Power: DAP), J18 (MD0) and J19 (SIN0)
Do not set J9 (USB Host powered)!
✓
Set J20 to position 1-2 (SOT0)
✓
Set J21 to position 1-2 (MD1)
✓
Check jumper setting: J14:2-3 (P60)
•
Connect the board via USB CMSIS-DAP (CN3) to the USB-Port of the
PC
✓
When connected for first time Windows OS may ask for
‚spansionusbvcomm.inf‘
<drive:>
•
Use the FLASH MCU Programmer for FM3/FM4
✓
Install the latest version from here:
http://www.cypress.com/documentation/software-and-drivers/flash-mcu-
programmer-1
*
Note: Do not connect CN4 to PC/USB while using serial programming
Содержание FM4-U120-9B560
