Line Specifications:
(See also the Installation Guide)
The K-Tech ET901 works on most phone lines meeting
the following minimum conditions:
1. 24 - 51 V Analog line (on hook)
2. DTMF
compatible
3. 20 mA min loop current
4. 18 –22 gauge shielded twisted pair in elevator trav-
eling cable.
Phone number hints:
Check to see if you need to dial the area code or 1 be-
fore the number.
On PBX systems you may have to put a 9 or 8 and a
pause (
¾
) before the phone number. Also you may
need to set the timer to “02” or “03” for proper shutoff.
Special Conditions:
The K-Tech ET901 has it’s own built in dialer and cannot
be used with an external dialer.
Using the phone on a
ringdown
circuit may restrict use
of SUREphone features which are related to the dialing
circuit. Program a pause in phone location 1.
All special phone line features, such as call waiting and
call forwarding should be turned off.
QUICK TROUBLESHOOTING
K-Tech
ET901
Programming
Guide
Serial Number:
____________________________
Date Installed:
____________________________
Installed by:
____________________________
Phone Line #:
____________________________
Phone line Voltage:
48VDC (POTS or CO line)
24VDC (PBX System)
Other ____________________
Phone Number(s)
Dialing:
1.
___________________________________
2.
___________________________________
3.
___________________________________
4.
___________________________________
5. ___________________________________
Voice message
________________________________________________
________________________________________________
________________________________________________
________________________________________________
SERIAL #
K-Tech International Inc.
Part # PCB045 Rev. ___
5 _ _ _ _ _
FAQ
Q. Operator cannot hear passenger at beginning of call.
A. If not using voice message announcement—check to
see if it is deleted properly.
Q. Can the phone work only on phone line power?
A. The SUREphone requires AC power in order to
operate.
Q. Passenger cannot hear operator.
A. Check for excessive noise in elevator, such as a bad
fan. On COP mount units check for proper sealing
between COP and phone faceplate
Keep This Booklet for
Reference
Additional information is available at
www.KTechOnline.com
K-Tech International, Inc
BOK057 Printed in USA
56 Ella Grasso Ave
Torrington, CT 06790 USA
Phone
(860) 489-9399
Sales:
1-800-993-9399
Tech Support: 1-888-883-8399
Fax
(860) 489-4399
Email: [email protected]
Website: www.KTechOnline.com
THE INFORMATION BELOW IS IMPORTANT.
YOU MUST HAVE THE SERIAL NUMBER
AVAILABLE WHEN CALLING TECH SUPPORT.
1-888-883-8399