PSoC® 4100S Pioneer Kit Guide, Doc. # 002-14067 Rev. *C
6
Introduction
Figure 1-1. Kit Contents
Inspect the contents of the kit; if you find any part missing, contact your nearest Cypress sales office
for help:
www.cypress.com/support
.
1.2
Board Details
As shown in
Figure 1-2
, the PSoC 4100S Pioneer Kit features a CapSense trackpad, two CapSense
buttons, and a proximity sensor loop (not visible on the case) that allows you to evaluate Cypress’s
fourth-generation CapSense technology. The kit has two user buttons, an RGB LED, and a potenti-
ometer that can be used in your applications. It also has a reset button and three status LEDs. The
kit can be powered from three power sources: USB connector, rechargeable battery, or an external
power supply. The kit can operate at 1.9 V, 3.3 V, and 5 V when powered from the USB connector or
external power supply and will operate at 3 V when powered from the battery. The USB connector is
also used for programming and debugging your application on PSoC 4100S.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from