background image

PSoC® 4100S Pioneer Kit Guide, Doc. # 002-14067 Rev. *C

29

Kit Operation

3.1.5

Attaching the Overlay

The overlay has micro-suction tape on the bottom, which allows you to attach the overlay to the kit,
when required. Follow these steps to attach the overlay:
1. Keep the kit on a flat surface. Align the top-left corner of the overlay to the corner edge of the top 

case, as shown in 

Figure 3-11

.

Figure 3-11.  Attaching the Overlay 

2. Place the top edge of the overlay first; then, slide your finger along the overlay surface.

3.2

KitProg2

The PSoC 4100S Pioneer Kit can be programmed and debugged using the onboard KitProg2. The
KitProg2 is a multi-functional system, which includes a programmer, debugger, USB-I2C bridge, and
USB-UART bridge. The PSoC 4100S Pioneer Kit also supports mass storage programming using
KitProg2. A Cypress PSoC 5LP device is used to implement the KitProg2 functionality. The KitProg2
is integrated in most PSoC development kits. For more details on the KitProg2 functionality, refer to
the 

KitProg2 User Guide

 available in the following path in the kit installation directory:

<Install_Directory>\CY8CKIT-041-41XX PSoC 4100S Pioneer Kit\<version>\
Documentation\KitProg2_User_Guide.pdf

Before programming the device, ensure that PSoC Creator and PSoC Programmer are installed on
the computer. See 

Install Software on page 17

 for more information.

3.2.1

Programming and Debugging using PSoC Creator

Ensure switch SW5 is in the “PSoC 4100S” position to select the PSoC 4100S as the target device
for programming. In the other position, the EZ-BLE PRoC Module on the kit can be programmed
(see 

Programming the EZ-BLE PRoC Module on page 30

).

1. Connect the PSoC 4100S Pioneer Kit to the PC using the USB cable, as shown in 

Figure 3-12

The kit enumerates as a composite device if you are connecting it to your PC for the first time. 
The successful enumeration is indicated by the following status LEDs: amber LED On, green 
LED Off and red LED Off. If you do not see the desired LED status, refer to the 

KitProg2 User 

Guide

 

for details on the KitProg2 status and troubleshooting instructions.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Содержание CY8CKIT-041-41XX























































Отзывы: