Cypress CY6611, Руководство пользователя

Страница: 16 / 32

CY6611 System Design
CY6611 EZ-USB HX3PD Evaluation Kit Guide, Document Number: 002-26068 Rev *A 15
The hardware design files of CY6611 EVK (Schematics, BoM, and layout files) are available as part of the kit installation at
<Install_Directory>\CY6611 EZ-USB HX3PD EVK\1.0\Hardware .
Note : On Windows 32-bit platforms, the default <Install Directory> is C:\Program Files\Cypress , and on Windows 64-bit
platforms, it is C:\Program Files (x86)\Cypress .
3.2.2 CY6611 Jumpers, LEDs and Headers
This section provides details of various interfaces of the CY6611 EVK board.
Figure 3-2. CY6611 EVK Board Interfaces
Table 3-2 provides details of the three jumpers available on the CY6611 EVK hardware.
Table 3-2. CY6611 EVK Jumpers
# Jumper Header Description Default State
1 J2 DMC LED Jumper. Jumper to enable DMC LED Jumper is installed
2 J6
1.2-V Supply Jumper. Jumper to enable 1.2-V supply to the
HX3PD controller.
Jumper is installed
3 J10
3.3-V Supply Jumper. Jumper to enable 3.3-V supply to the
HX3PD controller
Jumper is installed