CY6611 EZ-USB HX3PD Evaluation Kit Guide, Document Number: 002-26068 Rev *A
10
2
Installation
This chapter describes the installation procedure for the CY6611 EZ-USB HX3PD EVK. The installation includes software,
documentation, firmware, and hardware design files.
Following are the software utilities which are needed to operate the CY6611 EVK.
1.
EZ-USB HX3PD Configuration Utility
: This utility is required to configure the HX3PD firmware (DMC and PD Controller
firmware) and to download the firmware to the CY6611 EVK.
2.
EZ-PD Configuration Utility
: This utility is launched by the EZ-USB HX3PD Configuration Utility to configure the DMC and
PD Controller firmware.
The CY6611 EVK installation is a three-step process which is described in the following sections. Make sure that the installation
is done only in the same order as specified.
2.1 Installing the EZ-PD Configuration Utility
1. Download the latest EZ-PD Configuration Utility setup file from the utility
. The setup file contains the executable
files for the utility and the documentation (User Manual and Release Notes). Double-click the executable to start the
installation. Click
Next
when the screen shown in
appears and go through rest of the installation process.
Figure 2-1. EZ-PD Configuration Utility Installer Screen
