Cypress CapSense CY3280-SmartSense, Руководство к набору

Страница: 5 / 30

CY3280-SmartSense CapSense Auto-Tuning Kit Guide, Doc. # 001-64672 Rev. *B 5
1. Introduction
1.1 Overview
Thank you for your interest in the CY3280-SmartSense™ CapSense
®
Auto-Tuning Kit. This kit is
designed to showcase the abilities of the patented SmartSense algorithm, which does automatic tun-
ing of capacitive sensor designs over the conventional manual-tuning approach.
1.2 Kit Contents
■
CY3280-SmartSense Kit
■
Two AAA batteries
■
Overlay - Clear acrylic overlays with matt finish on one side in 1 mm, 2 mm, 3 mm thickness.
2 mm thick overlay is stuck to the board
■
Axial capacitors 10 pF, 22 pF, 33 pF, 68 pF
■
Printed documentation
■
Quick Start Guide
❐
CY3280-SmartSense schematic
1.3 Installation
Everything you need to use the CY3280-SmartSense kit is included; install the software to load and
run the example projects on the board.
1.3.1 Before You Begin
All Cypress software installations require administrator privileges, but this is not required to run the
installed software.
■
Close any Cypress software that is currently running.
■
Disconnect any ICE Cube or MiniProg devices from your computer.
1.3.2 Prerequisites
PSoC Designer™ uses the Microsoft .NET Framework, Adobe Acrobat Reader, and a Windows
Installer. If .NET Framework and Windows Installer are not on your computer, the installation auto-
matically installs it. If you do not have Adobe Acrobat Reader, download and install it from the Adobe
website.
Download the kit specific software CD ISO from http://www.cypress.com/go/CY3280-SmartSense .