CYP PU-8H8HBT, Руководство по эксплуатации

Страница: 13 / 24

8
6.7 RS-232 and Telnet Commands
Command Description
A1~A8
Switch Output A to 1~8
B1~B8 Switch Output B to 1~8
C1~C8
Switch Output C to 1~8
D1~D8
Switch Output D to 1~8
E1~E8 Switch Output E to 1~8
F1~F8
Switch Output F to 1~8
G1~G8
Switch Output G to 1~8
H1~H8 Switch Output H to 1~8
ABCE…1~ABCD…8 Switch Output ABCD… to 1~8 at the
same time
SETIP <IP><SubNet><GW>
Setting IP. SubNet.GateWay<Static IP>
RSTIP IP configuration was reset to factory
defaults<DHCP>
IPCONFIG Display the current IP config
P0 Power Off
P1 Power On
I1~I8 Switch all the output to 1~8
ST
Display the current matrix state and
firmware version
RS
System Reset to H8
EM Setting EDID MODE. 1-STD 2-TV.
?
Display all available commands
QUIT
Exit (Telnet only)
Note: Any commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.