CYP PU-8H8HBT, Руководство по эксплуатации

Страница: 8 / 24

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER LOCK
MENU OUT A 1 B 2 C 3 D 4
IN
E
5
F
6
G
7
H
8
2 3 4 5 6 1
1 LCM :
Displays the setting information of each input and output
setting.
2 POWER:
Press this button to power the device on/off. The LED will
illuminate green when the power is on, red when it is in 'Standby'
mode.
3 LOCK:
Press this button to lock all the buttons on the panel; press
again to unlock. The LED will illuminate green when locked.
4 IR:
IR Receiver window (accepts the remote control signal of this
device only).
5 MENU:
Press this button to access the LCM menu system, from here
EDID settings can be managed and IP system settings are displayed.
6 1~8/A~H and OUT/IN:
Press the OUT or IN button to select the
output or input mode and then press the required number button to
make the selection accordingly.
For example, if outputs A~D need to be set to input 1 and outputs
E~H need to be set to input 2, then the following sequence of button
presses need to be performed:
Press: OUT  A  B  C  D  IN  1  MENU,
and then press: OUT  E  F  G  H  IN  2  MENU.
Note: If the MENU button is not pressed the selection will not be changed.