CYP MED-VPR-3420, Руководство по эксплуатации

Страница: 43 / 76

37
6.5.9 Ethernet Tab
This tab provides controls to change the network settings for the unit. You
can manually set the IP address, netmask and gateway address in “Static IP”
mode, or you can obtain an IP address automatically by enabling DHCP.
Note: The unit’s default Static IP address is 192.168.1.50. If the IP address
is changed then the IP address required for WebGUI/Telnet access will also
change accordingly.
1) IP Mode:
Click this button to toggle between the Static IP and DHCP
modes. In DHCP mode, the unit will attempt to automatically obtain its IP
configuration details from a local DHCP server. In Static mode the unit
will use the manually assigned IP configuration information.
2) Static IP Config:
When the unit is in Static IP mode the IP address,
netmask and gateway addresses may be manually set here. Click “Save”
to apply and use the newly entered address.
3) Link Status: Displays the unit’s current IP configuration and the unit’s
MAC address.