CYP MED-VPR-3420, Руководство по эксплуатации

Страница: 13 / 76

7
6.2 Rear Panel
USB 3.0 CAPTURE OUT CAPTURE IN
AUDIO IN
HDMI IN
1 2 3
4 HDMI OUT A HDMI OUT B CONTROL RS-232 DC 24V
5
1 2 3 4
6 9 8 7 10
1
USB 3.0 Port:
Connect directly to a PC’s USB 3.0 port to control and
power the video capture component of the unit.
Note: If connected via USB 2.0, use of a Y-cable connected to 2 USB 2.0
ports is required in order to properly power the video capture component
of the unit.
2
CAPTURE OUT Port:
The video bypass output from the video capture
component of the unit. Connect to an HDMI TV, monitor or amplifier for
digital video and audio output.
3
CAPTURE IN Port:
The video input for the video capture component of
the unit. To capture video from the multiviewer component of the unit,
connect this port to the HDMI OUT B port located directly below it.
Note: Capturing video sources containing HDCP protection is not
supported. Only the bypass CAPTURE OUT port will be active with
HDCP sources.
4
AUDIO IN Port:
Connect to the stereo analog output of a device such as
an audio player or PC for capture via USB 3.0.
5
HDMI IN 1~4 Ports:
Video inputs for the multiviewer component of
the unit. Connect to HDMI source equipment such as players, game
consoles, or set-top boxes.
Note: Audio support on inputs 3~4 is limited to 2 channel LPCM.
6
HDMI OUT A Port:
Primary HDMI output of the multiviewer component
of the unit. Connect to HDMI TVs, monitors, or amplifiers for digital video
and audio output.