CYP IP-7000TX, Инструкции по эксплуатации

Страница: 18 / 44

18
4. Transmitter Specific
COMMAND DESCRIPTION AND PARAMETERS
SET_VW_DELAY N1 {N2}
Set the video wall display delay.
N1 = 0~99999 (Delay in
microseconds)
N2 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained
by turning on the Video Wall OSD. Omitting
N2 makes the setting global to all Receivers.
5. Receiver Specific
COMMAND DESCRIPTION AND PARAMETERS
SET_EDID_COPY N1 Copy and use the EDID of the connected
display.
Available values of N1:
0 [Disabled]
1 [Enabled]
GET_EDID_COPY Show the state of the EDID copy function.
R N1
Select the VoIP transmission channel to
display.
N1 = 0~255
GET_RX_CHANNEL
Show the currently selected VoIP
transmission channel.