CYP IP-7000TX, Инструкции по эксплуатации

Страница: 17 / 44

17
4. Transmitter Specific
COMMAND DESCRIPTION AND PARAMETERS
SET_VW_HSCALE N1 {N2}
Set the video wall display’s horizontal zoom
amount.
N1= 0~99999 [Zoom amount in 1
pixel units]
N2 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained
by turning on the Video Wall OSD. Omitting
N2 makes the setting global to all Receivers.
SET_VW_VSCALE N1 {N2} Set the video wall display’s vertical zoom
amount.
N1 = 0~99999 [Zoom amount in 1
pixel units]
N2 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained
by turning on the Video Wall OSD. Omitting
N2 makes the setting global to all Receivers.
SET_VW_SHIFT N1 N2 {N3}
Set the video wall display’s output shift.
Available values for N1:
U
[Shift up]
D [Shift down]
L [Shift left]
R [Shift right]
N2 = 0~80000 [Pixel shift amount.
Must be in increments
of 8.]
N3 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained
by turning on the Video Wall OSD. Omitting
N2 makes the setting global to all Receivers.