CYP IP-7000TX, Инструкции по эксплуатации

Страница: 30 / 44

30
-
VW (Video Width): This is the horizontal measurement of the
display’s video screen.
-
VH (Video Height): This is the vertical measurement of the display’s
video screen.
Note: Typically all monitors in a video wall are identical and have the same
dimensions, but it is possible to use differently sized displays as long as the
same measurement units are used to measure each display and the displays
are still arranged in a normal rectangular layout with corners meeting at the
same place.
Wall Size and Position Layout
This section of the Video Wall tab is used to define the number of displays
used in the video wall as well as the location of the specific display
within the video wall. A typical video wall consists of an equal number
of horizontal and vertical monitors (for example: 2×2 or 3×3), however
it is possible to create video walls using this system with a wider variety
of dimensions as long as the end result is still a rectangle (for example:
5×1 or 2×3). Both horizontal and vertical dimensions are limited to a
maximum of 8 displays.
-
Vertical Monitor Count: Define the number of displays in the video
wall, measured vertically. (Maximum is 8 displays)
-
Horizontal Monitor Count: Define the number of displays in the
video wall, measured horizontally. (Maximum is 8 displays)
- Row Position:
Set the vertical location of the currently controlled
display. (Counts top to bottom, from 0 to 7)
-
Column Position:
Set the horizontal location of the currently
controlled display. (Counts left to right, from 0 to 7)
Preferences
This section of the Video Wall tab provides additional controls over how
the source video is displayed on the video wall as well as providing a drop
down to determine which Receiver to apply changed settings to.