CYP Hyshare Pro, Руководство по эксплуатации

Страница: 21 / 52

15
3) Hyshare Pro Uses the Organization’s Wired LAN: In this configuration
the Hyshare Pro’s Wi-Fi is completely disabled and uses the
organization’s wired network as the connection point.
Step 1) Ensure the unit is connected to the same internal network
as your computer via Ethernet cable and connect to the
configuration page using a web browser.
Note: The unit’s IP address can be obtained from the OSD.
Step 2) Log into the unit as administrator and browse to the Network/Wi-
Fi page. Choose “Hyshare Pro Wi-Fi off” and click the “Apply”
button.
Step 3) Browse to the Network/Ethernet page and ensure that the unit is
set to “DHCP”.
Note: In some cases, it may be appropriate or necessary to set
the network mode to “Static” and configure the values manually.
Please contact your organization’s IT department if you are
unsure.
Step 4) Connect the device you wish to share a screen from to the
organization’s network and initiate sharing normally using the
unit’s IP address. (Please see Section 9 for more details)