
5
7. INSTALLATION
7.1 Wall Mounting
Step 1)
Drill two screw starter holes into the mounting wall with 140mm
space between them, as shown in the image below. Use screw
anchors if needed.
140 mm
3.3 mm
Ø 6 mm
Step 2)
Drive a screw into each hole, leaving a small gap between the wall
and the screw head.
Screw Head Diameter:
Between 5.5 ~ 6 mm.
Screw Rod Diameter:
Less than 3.3 mm.
Step 3)
Carefully hang the unit on both screw heads by fitting them into the
cross-shaped holes on the back of the unit, and slide it downwards
until it is fixed in place.
Note: Suggested height of wall mount is lower than 3 meters.
7.2 Cable Connection & Startup
Step 1)
Connect to a display with an HDMI or VGA cable.
Step 2)
Plug in the power supply (or connect the Ethernet cable, if powered
via PoE). The unit’s boot logo will show on the screen.
Step 3)
Plug in a USB mouse, or USB cable connected to a touch-capable
display, to activate the onscreen mouse functionality. (Optional)
Note: The default video output is HDMI only. If necessary, change
the video output to "HDMI and VGA" through the WebGUI.
Содержание Hyshare Pro
