CYP CPLUS-V8H8HPA, Руководство по эксплуатации

Страница: 42 / 56

37
COMMAND
Description and Parameters
HDCP Commands
SET IN N1 HDCP MODE N2

Set the HDCP behavior of the specified input.
N1 = 1~8 [Input port]
Available values for N2 :
0 [HDCP Disabled]
1 [Follow Source]
2 [Follow Display]
GET IN N1 HDCP MODE

Show the current HDCP behavior used by the specified input.
N1 = 1~8 [Input port]
GET IN N1 HDCP STATUS

Show the current HDCP status of the specified input.
N1 = 1~8 [Input port]
Available result codes:
0 [HDCP off]
1 [HDCP 1.x]
2 [HDCP 2.2]
GET OUT N1 HDCP STATUS

Show the current HDCP status of the specified output.
N1 = A~H [Output port]
Available result codes:
0 [HDCP off]
1 [HDCP 1.x]
2 [HDCP 2.2]
3 [HDCP 1.x failed]
4 [HDCP 2.2 failed]