CYP CPLUS-V8H8HPA, Руководство по эксплуатации

Страница: 31 / 56

26
6.9 Serial and Telnet Commands
COMMAND
Description and Parameters
General & System Commands
HELP

Show the full command list.
?

Show the full command list.
SET FACTORY DEFAULT

Reset the unit to the factory defaults.
SET FACTORY IPCONFIG DEFAULT

Reset the unit’s network settings to the factory defaults.
SET FACTORY OUT ROUTE DEFAULT

Reset the unit’s routing to the factory defaults.
SET POWER N1

Turn the unit on or place it into stand-by mode.
Available values for N1
:
ON [Power On]
STANDBY [Standby Mode]
GET POWER

Show the unit’s current power state.
SET UART 1 BAUDRATE N1

Set the baud rate of the RS-232 port.
Available values for
N1 :
4800 [4800 baud]
9600 [9600 baud]
19200 [19200 baud]
38400 [38400 baud]
57600 [57600 baud]
115200 [115200 baud]