CYP CPHD-V4L, Руководство по эксплуатации, Страница: 61 / 76

56
COMMAND
Description and Parameters
$SOURCE_DETECT? N1
Show a variety of source detection status and informational values.
Available values for
N1 :
5V [5V detection state]
HDCP [Source HDCP status detection]
HDCP_AKSV [Source AKSV in hex (HDCP v1.4)]
HDCP_BKSV [Rx BKSV in hex (HDCP v1.4)]
HDCP_RXID [HDCP Receiver ID in hex (HDCP v2.2)]
SCDC_SCR_ENABLE [Rx SCDC source enable scrambling state]
SCDC_SCR_STATUS [SCDC sink scrambling status]
SCDC_SINK_VER [SCDC sink version]
SCDC_SOURCE_VER [SCDC source version]
CKDT [TMDS clock detection]
DATA_RATE [Video data rate in Mbps]
TMDS_FORMAT [Detected TMDS format (DVI/HDMI)]
SCDT [TMDS sync detection]
HA [Horizontal active pixels]
HBP [Horizontal back porch pixels]
HFP [Horizontal front porch pixels]
HSW [Horizontal sync width pixels]
HT [Total horizontal pixels]
HSP [Horizontal sync polarity]
HVS_OFFSET1 [Interlace odd field vertical offset in lines]
HVS_OFFSET2 [Interlace even field vertical offset in lines]
PIXEL_CLOCK [Pixel clock in kHz]
SCAN [Video scan mode]
TIMING [Video timing (Ref. “Video Timing List”)]
TMDS_CLOCK [TMDS clock in kHz]
VA [Vertical active lines]
VBP [Vertical back porch lines]
VFP [Vertical front porch lines]
VSW [Vertical sync width lines]
VT [Total vertical lines]
VSP [Vertical sync polarity]
ACR [Audio-Clock-Recovery packet status]
ACR_CTS [Audio-Clock-Recovery CTS value]
ACR_N [Audio-Clock-Recovery N value]
ASP [Audio-Sample packet status]
ASP_CH [Audio-Sample packet channel number]
ASP_FIFO [Audio-Sample packet audio FIFO]