CYP CPHD-V4L, Руководство по эксплуатации, Страница: 39 / 76

34
6.6.3 Cable Test Mode
MAIN MENU
Run Test
Cable Setup
Setup
Information
RUN TEST
2ND LEVEL
3RD LEVEL
[Testing Configuration]
[Analytic Data]
(PASS or FAIL Result)
+5V
Hotplug
DDC Bus
CEC
ARC*
4K6G A/V
1) Run Test: This menu allows the activation of the cable test and displays
the results of the test across 2 pages. The cable under test should be
connected to both the HDMI input and HDMI output at the top of the unit.
Press the “Enter” button to begin testing using the current configuration.
Connectivity test results will be displayed immediately. The 4K6G A/V
error rate test on the second page will display a progress bar during the
test, then display a final PASS or FAIL result.
It is recommended that each cable under test should be tested at least
three times to help eliminate outlier results.
Note: The ARC test is only supported by hardware revision R3 or later.