CYP CPHD-V4L, Руководство по эксплуатации, Страница: 57 / 76

52
COMMAND
Description and Parameters
$HDR_EOTF N1

Set the HDR EOTF (Electro-Optical Transfer Function) mode.
Available values for N1 :
SDR [Traditional gamma, SDR luminance range]
HDR [Traditional gamma, HDR luminance range]
2084 [SMPTE ST 2084]
RSVD [Reserved for future use]
$HDR_EOTF?

Show the current HDR EOTF mode.
$HDR_MCLL N1

Set the maximum content light level for HDR.
N1
= 0~65500 [100 unit increments]
$HDR_MCLL?

Show the current maximum content light level for HDR.
$HDR_MFALL N1
Set the maximum frame average light level for HDR.
N1 = 0~65500 [100 unit increments]
$HDR_MFALL?

Show the current maximum frame average light level for HDR.
$HDR_SW N1

Enable or disable HDR simulation support on the unit’s HDMI output.
Available values for
N1 :
ON [HDR simulation enabled]
OFF [HDR simulation disabled]
$HDR_SW?

Show the current HDR simulation status for the unit’s HDMI output.