CYP CH-U331TX Скачать руководство пользователя страница 49

Страница: 49 / 88

1. INTRODUCTION

This unit is part of a 4K UHD Multi-Function Extension system that allows

you to extend HDMI or VGA signals along with KVM using the TCP/

IP protocol over regular Cat.5e/6/7 network cable. This extender

supports the transmission of Ultra High-Definition signals (up to 4K@30Hz

YUV 4:4:4 or 4K@60Hz YUV 4:2:0) with audio and USB up to 100m on a

single cable. The transmission distance can be further extended (up

to 100m per segment) by using gigabit network switches, allowing the

user to cascade the system without signal loss or introducing delay.

It is also possible to have the extension system's Transmitter operate

in multicast mode, allowing you to send a single AV signal to a large

number of Receivers within the same local network. Additionally, that

same multicast signal can be used to create large multi-display video

walls with amazing simplicity. This system is perfect for both residential

and commercial installation environments.
This system also features bi-directional IR and RS-232 pass-through,

analog line level in/out, and a microphone input (on the Receiver),

providing the user with a variety of audio options. The USB functionality

allows the system to act like a remote USB hub which, when combined

with the VGA input/output feature, provides a flexible remote KVM

platform. Configuration information is provided via On Screen Display

(OSD) and control is by WebGUI, Telnet, and front panel controls.

2. APPLICATIONS

•

HDMI, VGA, USB, Audio, IR, and RS-232 extension

•

Broadcasting a system over a single Cat.5e/6 cable

•   Multimedia display on a large number of displays via multicast
•   Hotel or convention center display multi-monitor broadcast
•   Long distance data and video transmission via cascading
•

Distributed video matrix system

• Distributed video wall system
• Remote KVM control of a system

Содержание CH-U331TX

























































































Результаты поиска

Содержание CH-U331TX

Отзывы:

Похожие инструкции для CH-U331TX

Бренды по названию

Популярные бренды

CYP CH-U331TX, Руководство по эксплуатации

Результаты поиска

Содержание CH-U331TX

Отзывы:

Похожие инструкции для CH-U331TX

Бренды по названию

Популярные бренды