CYP CH-331H-RX, Руководство по эксплуатации

Страница: 34 / 44

29
COMMAND
Description and Parameters
set_serial_bits N1

Set the number of serial data bits.
Available values for
N1 :
0 [5 bits]
1 [6 bits]
2 [7 bits]
3 [8 bits]
get_serial_bits

Show the current number of serial data bits.
set_serial_parity N1

Set the serial parity bit.
Available values for
N1 :
0 [None]
1 [Odd]
2 [Even]
get_serial_parity

Show the current serial parity bit.
set_serial_stop N1

Set the serial stop bits.
Available values for
N1 :
0 [1 stop bit]
1 [2 stop bits]
get_serial_stop

Show the current serial stop bits.
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.