18
COMMAND
Description and Parameters
SET OUT AUTO MODE N1
Enable or disable automatic source switching.
Available values for
N1
:
0
[Auto switch disabled]
1
[Auto switch enabled]
GET OUT AUTO MODE
Show the current auto switch mode state.
GET IN PORT NUMBER
Show the number of inputs on the unit.
GET OUT PORT NUMBER
Show the number of outputs on the unit.
GET IN N1 SYNC STATUS
Show the current sync status of the specified input.
N1
= 1~3
[Input number]
Available Responses:
0
[No
sync]
1
[Sync is active]
SET ALL IN EDID MODE N1
Enable or disable using the same EDID for all inputs.
Available values for
N1
:
ON
[All
mode]
OFF
[Appoint
mode]
GET ALL IN EDID MODE
Show the current state of the EDID assignment mode.
