7
6.3.1 Switch Tab
This tab provides video/audio routing control as well as control over HDCP
behavior, freerun settings, and naming of the inputs and output. To assign a
new video route, please click the output button and then click on the button
of the preferred input port to route. As you select each button they will
change their color to orange. The new route will become active immediately
and the routing information displayed on the buttons will change accordingly.
1) Output:
Click on the output button to begin routing selection followed by
the selection of the preferred input. Click on the Camera icon ( ) to mute
or unmute the output. Click the Edit icon ( ) to modify additional output
settings.
2) Edit Output:
This window provides options to rename the output, enable
auto switching, set audio routing, and configure freerun.
■ Output Name:
Provides a way to change the name of the output
port. Click on “Save” to confirm and activate any changes.
■ Auto Mode:
Enable or disable the auto input switching mode.
