CYP CDPS-U42HPIP, Инструкции по эксплуатации

Страница: 24 / 48

19
6.6.8 HDCP
COMMAND
DESCRIPTION VARIABLES
SET IN N1 MATRIX HDCP MODE N2

Set the HDCP mode to use with
Input
N1 in matrix mode.
N1 = 1~4 [Input number]
Available values for N2 :
0 [Disable HDCP]
1 [Refer to source]
2 [Refer to display]
GET IN N1 MATRIX HDCP MODE

Show the HDCP mode currently
used with Input
N1 in matrix
mode.
N1 = 1~4 [Input number]
SET IN N1 MULTIVIEW HDCP MODE N2

Set the HDCP version to enforce
on Input
N1 in multiviewer mode.
N1 = 1~4 [Input number]
Available values for N2 :
0 [Disable HDCP]
1 [HDCP 1.4]
2 [HDCP 2.2]
GET IN N1 MULTIVIEW HDCP MODE

Show the HDCP mode currently
used with Input
N1 in multiviewer
mode.
N1 = 1~4 [Input number]
SET WINDOW OUT N1 HDCP MUTE N2

Set the behavior of Output N1 if
the HDCP version of a source is
not supported.
N1 = A~B [Output letter]
Available values for N2 :
0 [Blank Window]
1 [Disable Output]
GET WINDOW OUT N1 HDCP MUTE

Show the behavior of Output N1
if the HDCP version of a source is
not supported.
N1 = A~B [Output letter]
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.