CYP CDPS-U42HPIP, Инструкции по эксплуатации

Страница: 19 / 48

14
6.6.4 Basic Commands
COMMAND
DESCRIPTION VARIABLES
!
Note: The maximum value depends on, and cannot exceed, the
current output resolution’s height.
GET PIP VSIZE

Show the current vertical PiP
window size.
SET PIP HPOSITION N1

Set the horizontal position of the
top left corner of the PiP window
(in pixels).
N1 = 0~? [Horizontal position]
!
Note: The maximum value depends on, and cannot exceed, the
current output resolution’s width minus 1.
GET PIP HPOSITION

Show the current horizontal
position of the PiP window.
SET PIP VPOSITION N1

Set the vertical position of the top
left corner of the PiP window (in
pixels).
N1 = 0~? [Vertical position]
!
Note: The maximum value depends on, and cannot exceed, the
current output resolution’s height minus 1.
GET PIP VPOSITION

Show the current vertical position
of the PiP window.
6.6.5 OSD Commands
COMMAND
DESCRIPTION VARIABLES
SET OUT A OSD BANNER DISPLAY N1

Enable or disable the OSD info
banner. N1 = ON, OFF [Info banner state]